扭剪型電動扳手工作原理扭剪扳手主要是終緊扭剪型高強螺栓的，它的目的就是把扭剪型高強螺栓的梅花頭打斷即可。工作時將扳手頭對準(zhǔn)螺栓頭，扣動開關(guān)即可開始工作，幾秒后，螺栓梅花頭將被扭斷，然后抽出扳手扣動扳機將梅花頭彈出，即結(jié)束工作。
The working principle of the electric wrench of the torsion shear type is mainly used for the final tightening of the high-strength bolt of the torsion shear type. The purpose of the wrench is to break the plum head of the high-strength bolt. When working, the wrench head should be aligned with the bolt head, and the switch can be pulled to start the work. After a few seconds, the bolt plum head will be broken, and then pull out the wrench to pull the trigger to pop out the plum head, which is the end of the work.
